SVETLITSA ™ film width 6 meters (per cut)

Film for greenhouses SVETLITSA™

Film for greenhouses SVETLITSA™ — is a durable, frost—resistant material based on an EVA copolymer. The film perfectly withstands aggressive environmental impacts and is easily restored after deformation.

Advantages of the SVETLITSA™ film

1. Reliability. Numerous small cracks form on polyethylene films, which are gradually filled with dust. SVETLITSA™ film is significantly less dusty and does not lose its ability to transmit light.

2. Light transmissivity. SVETLITSA™ film transmits light much better than polyethylene films. The light transmittance in the region of physiologically active radiation reaches 92%.

3. Hydrophilic effect. Flat and small drops of condensate are formed on the SVETLITSA™ film. Such drops flow down the walls of the greenhouse and do not drip.*

4. Maintainability. If the film has been subjected to mechanical stress, the construction dryer will repair the damage.

5. Heat-retaining effect. During a cold snap, the temperature in the greenhouse remains 2 to 4°C higher than under the polyethylene cover. This microclimate creates the conditions for increased yields.

6. Used in any climate conditions. The film withstands hail, sudden temperature changes, harsh, and snowy winters. Even in severe frost, the SVETLITSA ™ greenhouse film retains elasticity. Snow can be removed from the surface of the greenhouse without tearing the film.

7. Durability. The SVETLITSA ™ film serves for at least 7 years without removal for the winter. The key to the durability of the SVETLITSA ™ film is proper installation and operation as well as the absence of abnormally aggressive external factors.

SVETLITSA™ greenhouse film additives

• large agro-industrial greenhouses;
• small hothouses.

How to attach the film to the frame of the greenhouse?

1. Choose optimal mounting. There are plenty of options for attaching the greenhouse film to the greenhouse. Read more in our article
2. Place the film coating on the greenhouse at an air temperature of 15-22°C in still weather.
3. The distance for attaching the greenhouse depends on the climatic conditions of your region and the design of the greenhouse. Fasten the film on the frame with such a step that the film does not wobble in gusts of wind.
4. It is not allowed to use fastening elements with signs of rust.
5. Fix the edge of the film on one side of the greenhouse (or on the ground) and then untwist the roll. Unwrap the film.

6. Fix the film on the greenhouse.

Examples of using the SVETLITSA™ film.

How to buy SVETLITSA™ greenhouse film?

To purchase SVETLITSA™ film in St. Petersburg or make a purchase with delivery to the regions, you can place an order on the website or call the office. You can also buy SVETLITSA™ film in the regions from our dealers and partner stores.